Backup (export), Manual export – OpenEye E-Series Slim User Manual
Page 63
32705AB
63
Manual Export
Back up recorded data on a connected USB device.
Using this export method, video data is saved in a proprietary format and must be
viewed using the Export Viewer software.
To configure a data backup:
1.
Click
MENU
on the hover menu, and then click
BACKUP
.
2.
Connect a USB device.
3.
Click
SCAN
to locate the device.
4.
Select your desired
CAMERA
s and the
FROM
and
TO
time for the backup.
5.
Click
ESTIMATE
to display estimated data size and free space available.
6.
Select
EXPORT VIEWER
to add the Export Viewer to the backup file.
7.
Click
EXPORT
.
Refer to the USB Flash Drive Approved List in the Introduction chapter. If you are
using a new USB device to back up your data, you must format it first as FAT32.
Click
ESTIMATE
before clicking
EXPORT
. If any backup parameters are changed
(Date, Time, Channels) you must click
ESTIMATE
again.
Do not shutdown the system during the backup process.