Quick start instructions, Logging in for the first time – OpenEye OE3 E-Series User Manual
Page 17
29716AG
17
1.
Turn on the recorder. See the Turning on the Recorder section for more details.
2.
Log in -- Use the number buttons to enter the password when prompted
– The default
password is
<none>
– Press ENTER.
3.
Complete System Setup to set up the date, time and system ID. See the System section
for more details.
4.
Complete Disk Setup to set overwrite options and enable SMART Check. See the Disk
Setup section for more details.
5.
Complete User Setup to change the Admin password and add additional users. See the
System > User Setup section for more details.
6.
Complete Camera Setup for all attached cameras. See the Camera section for more
detail.
7.
Complete PTZ Setup for any attached Pan / Tilt / Zoom cameras. See the PTZ section
for more details.
8.
Create a recording schedule. See the Record section for more details.
9.
Complete Sensor Setup to enable any external devices connected to sensor inputs or
relay outputs. See the Record > Motion/Event section for more details.
10.
Complete Motion/Event Setup to trigger recording on an event: motion, sensor, video
loss. See the Motion/Event section for more details.
The recorder is now configured to record, search and playback video. See the Operation
section in this manual for more information on using the recorder.
Default administrative log in information:
ID:
admin
Password:
<none>