OpenEye OE3 E-Series - Manual (Page 22)

22
Connecting the Monitor
There are three available monitor outputs on the E-Series recorder.

Composite Monitor output for CCTV monitor
– BNC (Marked MAIN)

Spot monitor output for CCTV monitor – BNC (Marked SPOT)

VGA output for VGA monitor – Mini-Sub D15
Video Inputs and Looping Outputs
The E-Series comes with 4/8/16 BNC video inputs on the rear of its chassis. Each video input
has a corresponding looping BNC output for passing the video signal to another
monitoring/recording device.
Connecting to a Network
Use the RJ45 jack on the rear of the recorder when connecting to a network.
Connecting Audio
To record audio, connect the audio source to the connections on the audio ports on the back
of the recorder.
To listen to live or recorded audio connect the Audio Out Port to an amplified speaker system.
The audio output is a line level source which requires an amplified speaker system.
The audio input can be from an amplified source or directly from an amplified
microphone.