OpenEye OE3 E-Series - Manual (Page 41)

29716AG 41
Set the recording schedule for each camera:
1. Press MENU on the front panel or remote control.
or
Click
MENU on the Mouse-over menu and select SETUP .
2. Select RECORD > SCHEDULE .
3. Select a camera to create a recording schedule, or select ALL .
4. Select the check box of the desired RECORD MODE .
5. Click hour block or the day of the week to set the entire day.
NO RECORDING
No Color
No recording.
Even if you set recording frames and select ON in
RECORD > CAMERA, the recorder will not record
anything if you set OFF in RECORD > SCHEDULE.
CONTINUOUS
Yellow
Continuous recording.
MOTION
Green
MOTION-detection recording.
In this mode, the unit records only when motion is
detected in the motion area, and stops recording when
motion is not detected. Adjust motion area settings in
RECORD > MOTION/EVENT SETUP > INPUT.
If you set motion to OFF in RECORD > MOTION /EVENT
CONFGURATION and set CONT + MOT in SETUP >
RECORD > SCHEDULE the recorder will NOT record
when motion is detected.