Alarm monitor – OpenEye OE3 E-Series User Manual
Page 49
Advertising
29716AG
49
Send event information to a remote client using the Alarm Monitor software.
1.
Select
SEND TO ALARM MONITOR
and press ENTER to select ON.
2.
Select the types of events to send to the Emergency Agent
(
MOTION
,
SENSOR
,
MOTION + SENSOR
).
3.
Enter the
IP ADDRESS
of the remote client.
4.
Enter the
PORT
number.
The port number selected is the port that Alarm Monitor uses on the remote PC.
The port shown in this screen must match the port shown in Emergency Agent or
RADIUS and the port must be open on the remote PC.
Advertising