Backup (export), Manual export – OpenEye OE3 E-Series User Manual
Page 66
66
Manual Export
Back up recorded data on a CD-RW, DVD-RW or connected USB device.
Using this export method, video data is saved in a proprietary format and must be
viewed using the Export Viewer software.
To configure a data backup:
1.
Press BACKUP on the front panel or remote control.
or
Click
MENU
on the hover menu and select
BACKUP
.
2.
Connect a USB device or insert a CD/DVD.
3.
Select
SCAN
to locate the device.
4.
Select the desired
CAMERA
s and the
FROM
and
TO
time for the backup.
5.
Select
ESTIMATE
to display estimated data size and free space available.
6.
Select the
EXPORT VIEWER
check box to add the Export Viewer to the backup file.
7.
Select
EXPORT
.
The recorder supports DVD+R, and DVD-R. DVD-RW/+RW may not operate
correctly.
Refer to the USB Flash Drive Approved List in the Introduction chapter. If you are
using a new USB device to back up your data, you must format it first as FAT32.
ESTIMATE
must be selected first, before
WRITE
. If any backup parameters are
changed (Date, Time, Channels) you must select
ESTIMATE
again.
Do not shutdown the system during the backup process.