Research Concepts RC4000 - Manual (Page 38)

RC4000 Antenna Controller Chapter 2 Hardware
30
2.1.2.3.9 J9 - Ethernet
J9 "RABBIT" Type 12
- see IP appendix - actual interface will be RJ45
2.1.2.3.10 J10 - Audio
J10 "Audio" 2 pin Type 2
2.1.2.3.11 J11 - JTAG
J11 "JTAG" 20 pin Type 8
2.1.2.3.12 J12 - Fan1
J12 "FAN1" 2 pin Type 2
2.1.2.3.13 J13 - Fan2
J12 "FAN2" 2 pin Type 2
- programmed to operate (on / closed ??) at 0 deg. C
- normally hardwired to heating pads on underside of board for DVB heating
- to control external fans/heaters pins would need to be attached (to only be done by RCI factory)
2.1.2.3.11 J14 - IP RESET
2 pin "IP RES"