Super Systems MGA6000 - Manual (Page 20)

SSi Manual #4563 Rev. D Page 20 Multi-Gas Model 6000
change the baud rate, press the circular arrow key to cycle through the options or enter a number between
0 and 15. To enter the baud rate directly, the possible values are:
0 – 1200 8 - 57600
1 – 2400 9 - 76800
2 – 4800 10 - 115200
3 – 9600 11 - 230400
4 – 14400 12 - 460800
5 – 19200 13 - 921600
6 – 28800 14 - 128000
7 – 38400 15 – 256000
ATM Inst Type
This is the make and model of the instrument that will be supplying the MGA with information on: probe
temperature, probe millivolts, and COF/PF. To change the type, enter a number between 0 and 11 and
press Enter. The possible values are:
0 – SSi AC20 (Super Systems AC20)
1 – UDC 3300 (Honeywell UDC 3300)
2 – DP1 Mod (Marathon Sensors DualPro – Modbus Protocol Loop 1
3 – DP 2 Mod (Marathon Sensors DualPro – Modbus Protocol Loop 2
4 – DP 1 MMI (Marathon Sensors DualPro – MMI Protocol Loop 1
5 – DP 2 MMI (Marathon Sensors DualPro – MMI Protocol Loop 2
6 – Eur 2404 (Eurotherm 2404)
7 – Eur 2500 (Eurotherm 2500)
8 – CP V3.5 (Marathon Sensors CarbPro Version 3.5)
9 – CP V3.0 (Marathon Sensors CarbPro Version 3.0)
10 – CarbPC (Marathon Sensors CarbPC)
11 – 9200 LP 1
(Super Systems Model 9200 Loop 1)
ATM Inst Addr
This is the address of the ATM Inst. To change the address, enter the new value and press Enter. The
values can range from 0 to 250.
Furn TC Inst Type
This is the make and model of the instrument that will be supplying the MGA with information on furnace
temperature. If there is no instrument associated with this input, the MGA will use the value from the probe
temperature (ATM Inst Type) as the furnace temperature. To change the type, enter a number between 0
and 18 and press Enter. The possible values are:
0 – SSi 7EK (Super Systems 7EK)
1 – UDC 3300 (Honeywell UDC 3300)
2 – DP1 Mod (Marathon Sensors DualPro – Modbus Protocol
3 – DP 2 Mod (Marathon Sensors DualPro – Modbus Protocol
4 – DP 1 MMI (Marathon Sensors DualPro – MMI Protocol
5 – DP 2 MMI (Marathon Sensors DualPro – MMI Protocol
6 – Eur 2404 (Eurotherm 2404)
7 – Eur 2500 (Eurotherm 2500)
8 – UP V3.5 (Marathon Sensors UniPro Version 3.5)
9 – UP V3.0 (Marathon Sensors UniPro Version 3.0)
10 – CP3.5 SL (Slave Instrument connected to a Marathon Sensors CarbPro Version 3.5)
11 – CP3.0 SL (Slave Instrument connected to a Marathon Sensors CarbPro Version 3.0)
12 – 10Pro
(Marathon Sensors 10Pro)