SVSi N2000 Series - Manual (Page 21)

Page 21 N2000 Series User Manual www.svsiav.com
Chapter 2. Installation Step-by-Step Installation Instructions
STEP 1 SETTING UP YOUR HOST COMPUTER
In order to communicate with SVSi equipment, your devices must be on the same subnet as the host
computer. N2000 devices are shipped in Auto IP mode with a default IP address of 169.254.xxx.xxx. Before
beginning installation, you will need to make some changes to the computer running N-Able. These steps
show how this can be accomplished in a Microsoft Windows environment.
1. From the Start menu, select Control Panel > Network and Sharing Center.
2. Select Change
adapter settings.
3. Double-click the
wired interface to
your AV network,
and then click the
Properties button.