SVSi N2000 Series - Manual (Page 46)

Page 46 N2000 Series User Manual www.svsiav.com
Chapter 3. Encoder Options RS232 Settings
RS232 Settings
The section of the Settings page shown in Figure 3-5 is displayed when you click the RS232 Settings link.
Options are described in Table 3-3 .
Figure 3-5. RS232 Settings
Table 3-3. Settings Page: RS232 Settings
Option Description
RS232 Baud Rate Select the appropriate baud rate for the RS232 serial interface. Default is 9600.
RS232 Data Bits Select the appropriate data bit count for the RS232 serial interface. Default is 8.
RS232 Parity Select the appropriate parity for the RS232 serial interface. Default is no parity
(none).
RS232 Stop Bits Select the appropriate number of stop bits for the RS232 serial interface. Default
is 1.