Status section – SVSi N2000 Series User Manual
Page 80
Page 80
N2000 Series User Manual
www.svsiav.com
Chapter 4. Decoder Options
Status Section
Status Section
The Status section of the Settings page is shown in
. Options are described in
.
Figure 4-7. Status Section
Table 4-5. Settings Page: Status Section
Option
Description
Notes
DVI Status
Indicates if video is connected to the
Decoder.
Input Resolution
Indicates the video resolution of the
incoming video source.
Port 50001 Source
IP
Shows the IP address of the currently
connected device or displays
Disconnected if no connection exists.
Port 50001 can only accept a single
external connection at a time. If a
device is currently showing the port
occupied (by a control system or other
device), then other connections will be
rejected. However, connection
attempts from the same IP will
override the current connection.
Port 50002 Source
IP
Shows the IP address of the currently
connected device or displays
Disconnected if no connection exists.
Port 50002 can only accept a single
external connection at a time. If a
device is currently showing the port
occupied (by a control system or other
device), then other connections will be
rejected. However, connection
attempts from the same IP will
override the current connection.