SVSi N2000 Series - Manual (Page 81)

Page 81 N2000 Series User Manual www.svsiav.com
Chapter 4. Decoder Options Status Section
Serial Source IP Shows the IP address of the currently
connected device or displays
Disconnected if no connection exists. Only a single external connection can
be accepted on the port. If a device is
currently showing the port occupied
(by a control system or other device),
then other connections will be
rejected. However, connection
attempts from the same IP will
override the current connection.
Flush buttons These buttons reset the port.
Table 4-5. Settings Page: Status Section (Continued)
Option Description Notes