SVSi N2000 Series - Manual (Page 93)

Page 93 N2000 Series User Manual www.svsiav.com
Chapter 4. Decoder Options Serial Page
SERIAL PAGE
Click the Serial link at the top of any of the main web pages to access the page shown in Figure 4-16 . This
page allows you to upload and execute commands used for direct control of serial devices. Commands may
be saved for future use and executed later. The Serial Code menu lists all saved commands. See
Table 4-14
for option descriptions.
Figure 4-16. Serial Page
If the Port 5004/Serial Port is currently in use by another device, sending commands from the
Serial page will always return a No Data message and fail to send the commands.