Fcc class a notice – SVSi N2000 Series User Manual

Page 7

Advertising
background image

Page 7

N2000 Series User Manual

www.svsiav.com

.

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The Class A limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the users will be required to correct the interference at their own expense.
To comply with FCC and Industry Canada RF exposure limits, this device must be installed to
provide a separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter.

Service and Warranty

For information on the service and warranty of SVSi products please visit our website at

www.svsiav.com

.

Caution: These units contain no user-serviceable parts. They should only be serviced by
qualified service personnel. Opening the unit could void the warranty.

Advertising