SVSi N2000 Series - Manual (Page 49)

Page 49 N2000 Series User Manual www.svsiav.com
Chapter 3. Encoder Options Status Section
Status Section
The Status section of the Settings page is shown in Figure 3-7 . Options are described in Table 3-5 .
Figure 3-7. Status Section
Table 3-5. Settings Page: Status Section
Option Description Notes
DVI Status Indicates if a video source is
connected to the Encoder.
Input Resolution Indicates the video resolution of the
currently connected source.
DVI Status Pass
Thru Indicates if a display device is
connected to the Encoder.
Current Bandwidth This is a snapshot of the unit as
properties were loaded to the browser,
not a live counter. Refresh the page to
get an updated bandwidth.
Port 50001 Source
IP Shows the IP address of the currently
connected device or displays
Disconnected if no connection exists. Port 50001 can only accept a single
external connection at a time. If a
device is currently showing the port
occupied (by a control system or other
device), then other connections will be
rejected. However, connection
attempts from the same IP will
override the current connection.