ACTi ENR-1000 - Manual (Page 101)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
101
Set E-mail Notification Service
ENR supports e-mail notification for Event Handling. The e-mails are sent through an SMTP
server, the settings of which are configured in this section.
Go to Setup page  System tab  Email .
Please fill up all the fields including Account and Password to access the e-mail address
you input in “ Sender Email ”. ENR will send notification e-mail via this SMTP server when
an event occurs. For detailed instruction on how to set up an event rule related to SMTP
service, please refer to Set Event Rules on page 123.
Field Name Description
Sender Email Input the sender’s e-mail address, should the same account you set for SMTP
server.
Server Input the sender’s SMTP server address. Only alphabets, numbers, and the
symbols (.), (_), (-) are valid. ENR server supports the SMTP services with
SSL protocol. If you wish to use a free webmail SMTP service, you may
choose certain webmail providers such as Yahoo (SMTP:
smtp.mail.yahoo.com Port:25) or Gmail (SMTP: smtp.gmail.com Port:25 or
465 for SSL protocol / 587 for TLS protocol)
Port Set the SMTP port, allowed value is from 1~65535, default is 25 .
Account Input the name of the SMTP server account. The form of account name
depends on mail server, e.g. a Hotmail account name is a complete e-mail
address, while other e- mail servers’ may be not. Only alphabets, numbers,
and the symbols (@), (.), (_), (-) are valid.
Password Input the password of the SMTP server account. Only alphabets and numbers
are valid.