ACTi ENR-1000 - Manual (Page 69)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
69
Once a device is added to ENR server, the server would provide empty rules with compatible
trigger types for you to configure such as Motion 1, Motion 2 , Motion 3 , DI 1 , DI 2 , Network
Loss and Network Recovery . Select the Event Type , then click “ Set ” to select the trigger
types.
Trigger Type
 Trigger DO
Set the DO to become ON or OFF upon trigger, only the devices supporting DO functions
are available. Check the “ Enable ” to enable this function, and the device whose
connected DO(s) will be triggered. You may select one DO to be activated after the other
and the duration time between them. Clik “ OK ” to confirm.
 Send Mail
Enable ENR to send e-mail notifications via SMTP service.Check the “ Enable ” to enable
this function, and fill in the mail recipient ’s e-mail address in “ To ” field, notification title in
“ Subject ” field and mail body in “ Body ” field, then choose a camera whose snapshot will
be attached from Attach a Snapshot dropdown list. Clik “ OK ” to confirm. Please note
that if you want to attach a snapshot to the notification e-mail, make sure your local
display stays on Live screen during the event handing period, in this way, ENR can take
the snapshots for motion events.
To enable this service, you have to configure the e-mail setting (please refer to E-mail
Settings on page 58) before this trigger is enabled.