ACTi ENR-1000 - Manual (Page 72)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
72
1. After configuring the event handling rules, on Event tab, input the dwell time in
for all the rules you set. Dwell Time defines, after an
event occurs, the period of time during which the same event will not be triggered
again.
2. On Event tab, click “ Save ” to save the settings.
Clear Event Rules
On Event tab, you may select an event rule under certain camera, and click “ Clear This ” to
delete it, or “ Clear All ” to deleta all the rules belong to this camera.