ACTi ENR-1000 - Manual (Page 71)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
71
Go to Preset Points on page 49) on Live screen before you set the event rule.
On Go to Preset tab, check the “ Enable ” to enable this function (if there is no PTZ
camera exsiting in ENR server to execute a PTZ response, a red sign would appear on
the tab , please add a PTZ camera). Select which PTZ camera in ENR
server to make the movement, then the preset points and duration time between them.
Click “ OK ” to confirm.
 Beep
ENR device can play beep sound upon being triggered by events. On Beep tab , check
the “ Enable ” to enable this function. Input the duration time and prepeat times of the
beep. Click “ OK ” to confirm.
 Enlarge
Live screen will display certain channel view in full screen for a while when the system is
triggered. On Enlarge tab , check the “ Enable ” to enable this function. Select the camera
whose live view will be enlarged on Live screen and the duration time. Click “ OK ” to
confirm.