ACTi ENR-1000 - Manual (Page 122)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
122
Field Description
Pre-event Recording
Buffer (sec) :
ENR keeps a short cache of video received from devices. If an event
is triggered, ENR will automatically store the pre-event buffer along
with the recording of the event itself.
Post-event Recording
Buffer (sec):
This will determine how long after the event is triggered should be
included in the event recording file.
Set the Recording Schedule
1. Select a recording type.
2. On the recording schedule time table, click and drag to set time period .
3. Click “ Save ”
4. To delete the recording configuration, select and drag on the desired
section on time table.
Set the Event Handling Schedule
The Event Schedule defines when the event handling is activated. To set the event rules,
please refer to Set Event Rules on page 123. By default, the event handling is full-time
activated; you may disable it for a certain period.
Field Description
Full-Time Recording Continuously record at the video frame rate you define in Camera
Settings .
Event Recording Only events are recorded, at the video frame rate you define in
Camera Settings .
Event Speed Up
Recording
Continuously record everything at 1FPS, when an event occurs, the
frame rate will switch to the value you define in Camera Settings ,
and automatically switch back to 1FPS after the event ends.