ACTi ENR-1000 - Manual (Page 48)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
48
Open PTZ Panel
With PTZ cameras, you may define a view by where to look (through panning and tilting) and
how close (through zooming) to zoom. Once these views have been saved in ENR as preset
points, the device can always point to this view upon the event triggering or user ’s command.
For local operation, the PTZ-related configurations are done on Live screen. Please note that,
the PTZ- related settings you configure here will overwrite those on camera’s firmware.
On Live screen, select a PTZ channel, the PTZ panel will become enabled.
Manipulate PTZ Movements
Click the tab to enter PTZ operation mode, and make
make use of the device’s PTZ capabilities to define a view.
No Function
A Eight-direction arrow keys
Click to pan or tilt the camera (only available for cameras
with Pan/Tilt/ capability).
B Pan/Tilt/Zoom speed
Click to change the speed. Provided speed scale is
from 1 to 5 (available for cameras with Pan/Tilt/Zoom
capability).
C Auto focus (available for cameras with auto focus
capability)
D Zoom (Available for cameras with a controllable
zoom) Zoom in Zoom out
E Manual focus
(Available for cameras with a controllable focus)
Near focus Far focus
These buttons are enabled when the “ Auto Focus ” is
disabled.
1
2
A
B
C
D
E