E-mail settings – ACTi ENR-1000 User Manual
Page 58
ENR-
1000 Series System Administrator’s Manual
E-mail Settings
ENR supports e-mail notification for
Event Handling
sent through an SMTP server. To
enable this service, you will have to configure the SMTP mail settings in advance. For SMTP
service, please go to
Setup
page
System
tab
Network
and make sure the
Default
Gateway
adopts the setting of the LAN connection has access to the SMTP server.
1.
On
Live
screen, click
Setup
Select
System
tab
click “
”.
2.
Fill in
every field
according to the detailed instructions in the table below.
3.
Click “
Send Test Mail
” to send a test mail to this e-mail account. If the test mail is
sent successfully, the dialog box below will pop up, which means your ENR server is
ready to send out e-mail notifications when being triggered by an event.
4.
Click “
Save
” to save these properties.
Field Name
Description
Sender Email
Input the sender’s e-mail address, should the same account you set for SMTP
server.
Server
Input the sender’s SMTP server address. Only alphabets, numbers, and the
1
2
3
4