ACTi ENR-1000 - Manual (Page 26)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
26
Connect the Devices
Follow the procedures to connect the devices. These devices are supposed to be connected
in the sequence shown below.
1. Connect the HDMI monitor.
2. Connect the USB devices.
3. Attach the network cable to LAN1 port.
4. Attach the network cable to LAN2 port. (Optional, required for remote client
connection)
5. Plug the power adapter into ENR and electricity outlet.
6. Press down Power Button to start the device, the power status LED will turn solid
blue.
7. Connect the network cameras to the switch and power them on.
5
1
3
7
6
4
USB Devices
2