Ip settings, Enr- 1000 series system administrator’s manual – ACTi ENR-1000 User Manual
Page 53
ENR-
1000 Series System Administrator’s Manual
IP Settings
Go to
Setup
page
Network
tab
click
“
Network Connection
” and select the
LAN
interface card that you wish to set up. After setting up, please click
“
Save
” on the bottom right
to save the settings.
Field Name
Description
Connection Type
Choose one connection type for this LAN port. DHCP and PPPoE
service will assign an IP Address to ENR, and there is no need for
you to define other network information.
Manual
: Please obtain a static IP address and other network
information including Subnet Mask, Gateway and DNS server from
your network administrator.
DHCP
: Use this connection type if you have a DHCP server on your
network router.
PPPoE
: Chose this when your ISP is using PPPoE type DSL line.
Please contact you ISP to get the
Username
and
Password
for this
connection.
LAN1
default is
Manual
; LAN2
default is
DHCP
.
IP Address
Fixed IP Address.
LAN1
default is
192.168.0.10
;
LAN2
default is
Auto
.
LAN Connection Status
Shows “
Activated
” when connected to a network.
Shows “
Detected Network Cable Disconnection
” when not connected to a network