Network connection architecture, Lan 1 port, Connection setting example 1 – ACTi ENR-1000 User Manual
Page 24
ENR-
1000 Series System Administrator’s Manual
Network Connection Architecture
When connecting ENR with your network, please make sure you plug the network cable into
the right port.
LAN 1 Port
LAN 1
port is the default camera port for a typical local network. Via this port, the DHCP
server built in ENR automatically assigns IP addresses to network cameras once they are
connected. With this feature, you do not have to bother arranging the camera IP addresses
on your own. By default, this DHCP server is enabled, so please avoid connecting ENR to a
network where exits another DHCP server via this port.
Connection Setting Example 1
The diagram below displays a connection setting example using only
LAN1
to connect
networks cameras.
In this setting, ENR altogether with cameras are within the same network segment; in the
mean time, there is no need of referencing another DHCP server in this system.
LAN 1 Port (Camera Port)
Default:
192.168.0.10
LAN 2 Port (WAN Port)
Default:
Dynamic /192.168.1.10
192.168.0.101 ~ 192.168.0.104
LAN 1: 192.168.0.10