ACTi ENR-1000 - Manual (Page 124)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
124
Event Management
ENR can react to events occurring on the storage disk and camera site based on the rules
you set here.
Set Event Rules
Go to Setup page  Event tab, and select a camera or System to set Event rules.
Set System Event rule
Whenever any hard disk goes into abnormal status, ENR will trigger a response based on the
rule you set.
1. Click “ Set ” to enter the rule content.
2. Select your desired response type , configure the properties and then click “ OK ” to save
this rules. There are two types of response for a system event: Beep and Send Mail .
A
V
B
V
A
V