ATL Telecom AM200 - Manual (Page 106)

ATL User Guide
AM200 Modem 106
10.5.2.7 LINK TRAP ENABLE
Setting this to True ensures that trap messages will be sent should the interface become unavailable. Setting
this to False turns off the trap messages.
10.5.2.8 STATUS TRAP ENABLE
10.6 HDLC MENU
The HDLC menu allows you to either view or configure the Ethernet interface using the 'show' and 'set'
options. Select the config option to view or set the current configuration.
Note: The dotted lines show the options listed under each menu using the 'up' and 'down' buttons.
10.6.1 HDLC SHOW OPTION
Selecting the 'show' option will display the following sub-menu
Selecting the 'local' option will display the following sub-menu. Use the 'up' and 'down' buttons until the
desired option is displayed. Press the 'select' button to access the desired menu.Note: The remote option is
only valid when the unit has been set to 'master'
Hdlc:Show:
Local
RETURN
(Remote)
Hdlc:
Show
RETURN
Set
Local:STrapEn=
True
False
RETURN
Local:LTrapEn=
True
False
RETURN