ATL Telecom AM200 - Manual (Page 113)

ATL User Guide
AM200 Modem
113
10
10.7.2.9 LINE TRAP
Setting this to True ensures that trap messages will be sent should the interface become unavailable. Setting
this to False turns off the trap..
10.7.2.10 SIGNAL LOSS
The option only applies if the interface mode has been set to DTE. There are two options:
True - The loss of the incoming clock signal will be reported as a trap.
False - The loss of the incoming clock signal is not reported.
10.7.2.11 CLOCK OUT OF RANGE
The option only applies if the interface mode has been set to DTE. There are two options:
True - Reports that the incoming clock signal is out of range.
False - Is not reported.
Local:ClkOOREn=
True
RETURN
False
Local:SigLosEn=
True
RETURN
False
Local:LtrapEn=
True
RETURN
False