2 x.21/v.35 dte-to x.21, 3 g.703-to x.21/v.35 dce, X.21/v.35 dte-to x.21/v.35 dce – ATL Telecom AM200 User Manual
Page 32: G.703-to x.21/v.35 dce
Advertising
ATL User Guide
AM200 Modem
32
7.2.2 X.21/V.35 DTE-to X.21/V.35 DCE
In order to recover timing from the network, the CO end of the digital section must be configured as a DTE.
1.
At the CO, select the 'DTE' timing option for the Nx64 port.
2.
At the CPE, select the 'DCE' mode option for the Nx64 port.
7.2.3 G.703-to X.21/V.35 DCE
1.
At the CO, select the 'Loop' timing option for the G.703 port.
2.
At the CPE, select the 'DCE' mode option for the Nx64 port.
AM200
CPE
AM200
CO
Network or
Terminal
Terminal
G.703
Nx64 DTE
Nx64 DCE
G.703
B
AM200
CPE
AM200
CO
Network or
Terminal
Terminal
Nx64 DCE
Nx64 DTE
Nx64 DCE
Nx64 DTE
B
Advertising