ATL Telecom AM200 - Manual (Page 75)

ATL User Guide
AM200 Modem
75
9
To set-up the AM200 as a DHCP Relay Agent select the 'DHCP relay agent' option and then select the
'configure' button. The AM200 can now be configured (Figure 43) as a DHCP relay agent. Enter the IP address
of the DHCP sever in the appropriate box and press the 'apply' button.
Figure 43 DHCP Relay Agent screen
9.3.6.4 DNS Client
The DNS Client screen (Figure 44) allows the AM200 to use DNS names rather than IP Addresses. To Add a
DNS server, type in the IP address for the DNS server in the box below the DNS Servers heading and select the
add button. More than one DNS server can be added.
The 'Domain Search Order' option allows the user to list the order in which the DNS servers are searched for
the IP address that corresponds to the domain name. The top DNS server is searched first, then the second
DNS server is search, and so on until either a match is found or all of the DNS servers have been searched.
Figure 44 DNS Client screen