ATL Telecom AM200 - Manual (Page 79)

ATL User Guide
AM200 Modem
79
9
9.3.6.7 IP Routes
The IP Routes Screen (Figure 49) allows the user to set-up the AM200 as a static router. These are routes that
have been permanently entered into a routing table. Static routes are only affected by the relevant commands
- they do not change automatically. To create a new static route select the 'Create new static routes' option.
The resulting Create Static Routes screen (Figure 50) will be displayed. The user can now enter the static route
information. Select the OK button to save the static route information.
Figure 49 IP Routes screen
Figure 50 Create Static Route screen