ATL Telecom AM200 - Manual (Page 122)

ATL User Guide
AM200 Modem 122
13.7 TERMINAL CONNECTION
A VT100 compatible terminal can be plugged into the 9-way D-type connector on the front panel.
The socket is wired to allow a straight connection to a PC serial port. The serial port must have pins 2, 3, 4,
5 and 6 connected.
The serial port setting is 19200 baud, 8 bits, no parity, 1 stop bit and Xon/Xoff flow control.
The RS232C interface complies with the CCITT V24/V28 standards. The maximum length of cable between
communicating devices is limited to 15.2 metres (50 feet).
Pin # Function
1
2 Receive cct. 104
3 Transmit cct. 103
4 DTR
5 Ground cct. 102
6 DSR