ATL Telecom AM200 - Manual (Page 110)

ATL User Guide
AM200 Modem 110
10.7.2 Nx64 SET OPTION
Selecting the 'set' option will display the following sub-menu
Selecting the 'local' option will display the following sub-menu. Use the 'up' and 'down' buttons until the
desired option is displayed. Press the 'select' button to access the desired menu.Note: The remote option is
only valid when the unit has been set to 'master'
10.7.2.1 ADMIN STAUS
Setting this to ‘Up’ signifies the Nx64 interface is being managed. Setting this to ‘down’ signifies that the
interface is not being managed. To disable the Nx64 port the Admin Status must be set to ‘down’
Local:AdStatus=
Up
RETURN
Down
Test
Set:Local
AdminStatus
NTimes64k
Type
Mode
EnableDceClock
Circuit106Clamp
LocalLoop
LoopBack
LinkTrapEnable
SignalLostEnable
Clk00RangeEnable
RETURN
Nx64k:Set:
Local
RETURN
(Remote)