ATL Telecom AM200 - Manual (Page 6)

ATL User Guide
AM200 Modem 6
7.4 CROSSING A PDH NETWORK 33
8 SETTING UP USING CLI 34
8.1 CONNECTION VIA TERMINAL PORT 34
8.2 CONNECTION VIA ETHERNET PORT - TELNET 35
8.3 CLI COMMAND STRUCTURE 36
8.3.1 <GROUP> 36
8.3.2 <SUB-GROUP> 36
8.3.3 <COMMAND> 36
8.3.4 <INSTANCE> 36
8.3.5 <ATTRIBUTE-NAME> 36
8.3.6 <ATTRIBUTE-VALUE> 37
8.4 CLI HELP COMMAND 38
8.5 CLI AUTO COMPLETE 40
8.6 CHANGING THE IP ADDRESS 41
8.7 SETTING CO/CPE 41
8.7.1 TO SET THE AM200 AS CPE 41
8.7.2 TO SET AS CO 41
8.8 SETTING THE DSL LINE RATE 41
8.9 MANAGEMENT MODE 43
8.10 THE USER INTERFACE 44
8.10.1 ETHERNET PORT 44
8.10.1.1 Setting the Ethernet User Port Data Rate 44
8.10.1.2 Enabling Alarm Reporting 44
8.10.2 G703 USER PORT 44
8.10.2.1 Enabling the G703 Alarm Reporting 44
8.10.2.2 Setting the G703 Time slots 44
8.10.3 NX64 USER PORT 45
8.10.3.1 Enabling the Nx64 Alarm Reporing 45
8.10.3.2 Setting the Nx64 User Port Type 45
8.10.3.3 Setting The Nx64k User Port Data Rate 46
8.11 BRIDGE 48
8.12 ROUTER 50
8.13 RIP 51
8.14 RESTORING FACTORY DEFAULT 52
8.15 SAVING CLI CHANGES 52
8.16 RESTORING TO SAVED SETTINGS 52
8.17 EXAMPLE CONFIGURATION 53
8.17.1 G703 EXAMPLE CONFIGURATION 53
8.17.2 V35 EXAMPLE CONFIGURATION 54
8.17.3 V35 & G703 EXAMPLE CONFIGURATION 55