ATL Telecom AM200 - Manual (Page 114)

ATL User Guide
AM200 Modem 114
10.8 SYSTEM MENU
The System menu allows you to either restart the unit, save the current configuration or restore from a saved
configuration.
Note: The dotted lines show the options listed under each menu using the 'up' and 'down' buttons.
10.8.1 RESTART
The AM200 can be restarted using the last saved ‘normal’ configuration. Select the confirm option to restart
the unit. If confirm is selected, the message ‘rebooting’ will appear on the bottom of the LCD.
10.8.2 CONFIGURE
Selecting the ‘config’ option from the ‘system’ menu opens the sub-menu shown below. You can now either
select the ‘restore’ or ‘save’ options
10.8.2.1 SAVE
Selecting the ‘save’ option from the ‘config’ sub-menu opens the sub-menu shown below. You can now
either save the current configuration into either the Normal or Backup file names.
Selecting the ‘normal’ option will display the following sub-menu. To save the current configuration select the
‘Confirm’ option. ‘Saving’ will then appear on the LCD, followed by ‘Done’ If the AM200 failed to save the
configuration then ‘Failed’ will be displayed. Alternatively the current configuration could also be saved in
the backup location
Config:Save:
Normal
RETURN
Backup
System:Config:
Save
RETURN
Restore
System:Restart:
Confirm
RETURN
System:
Restart
RETURN
Config