H3C Technologies H3C SR6600-X - Manual (Page 17)

9
Front panels
Figure 7 Front panel of HIM-CL1P
(1) SFP port carrier signal LED (LINK/ACT) (2) SFP port loopback/alarm LED (LP/AL) of SFP port
(3) SFP port (4) Captive screw
(5) Ejector lever
Figure 8 Front panel of HIM-CL2P
(1) SFP port carrier signal LED (LINK/ACT) (2) SFP port loopback/alarm LED (LP/AL)
(3) SFP port (4) Captive screw
(5) Ejector lever
LEDs
Table 9 LED description
LED Status Description
LINK/ACT
(Green)
Off No link is present.
On A 155.52 Mbps link is present.
Flashing The SFP port is receiving or sending data at 155.52 Mbps.
LP/AL
(Yellow)
Off No loopback or alarm exists.
On The port is in loopback state.
Flashing There is a minimum of one alarm.