Leds, Interface specifications – H3C Technologies H3C SR6600-X User Manual

Page 22

Advertising
background image

14

Figure 12 Front panel

(1) Captive screw

(2) Ejector lever

(3) SFP port carrier signal LED (LINK/ACT)

(4) SFP port loopback/alarm LED (LP/AL)

(5) SFP port 3 (155 Mbps) or SFP port 1 (622 Mbps)
(6) SFP port 2 (155 Mbps) or SFP port 0 (622 Mbps)
(7) SFP port 1 (155 Mbps)

(8) SFP port 0 (155 Mbps)

LEDs

Table 13 LED description

LED Status

Description

LINK/ACT
(Green)

Off

No link is present.

On

A 155.52/622.08 Mbps link is present.

Flashing

The SFP port is receiving or sending data at 155.52/622.08 Mbps.

LP/AL
(Yellow)

Off

No loopback or alarm exists.

On

The port is in loopback state.

Flashing

There is a minimum of one alarm.

Interface specifications

Table 14 Interface specifications

Item Specification

Connector type

SFP/LC

Number of interfaces

HIM-MSP2P: 2 OC-3 interfaces or 1 OC-12 interface

HIM-MSP4P: 4 OC-3 interfaces or 2 OC-12 interfaces

Interface standards

SONET STS-3/STS-12

SDH STM-1/STM-4

Interface speed

155.52/622.08 Mbps

OC-3 interface (155.52 Mbps)

Optical

Type

Short distance

Medium distance Long distance

Ultra-long distance

1

2

3
4

5

6

7

8

Advertising