H3C Technologies H3C SR6600-X - Manual (Page 47)

39
Item Specification
Services supported T3 leased line
Interface cables
The MIM-1CE3 provides two SMB interfaces, with one interface acting as the transmission end (Tx) and
the other as the receiving end (Rx). The Tx and Rx interfaces operate in the 75-ohm unbalanced
transmission mode and thereby need a pair of 75-ohm unbalanced coaxial cables in use for connection
with the peer device.
NOTE:
•
The MIM-1CT3 and MIM-1CE3 use the same type of E3/T3 cable.
• The E3/T3 cable is an optional accessory for the MIM-1CE3 to be separately ordered if needed.
• For the appearance and connection of an E3/T3 cable, see Connecting a CE3/CT3 interface cable .
MIM-2SAE (RT-MIM-2SAE-H3)/MIM-4SAE
(RT-MIM-4SAE-H3)/MIM-8SAE (RT-MIM-8SAE-H3)
The MIM-2SAE, MIM-4SAE, and MIM-8SAE are 2/4/8-port enhanced synchronous/asynchronous
serial interface modules.
The MIM-2SAE/MIM-4SAE/MIM-8SAE only works in synchronous mode to receive, send and process
the synchronous serial data. The MIM-2SAE/MIM-4SAE/MIM-8SAE supports the DTE/DCE mode.
Front panels
Figure 29 Front panel of MIM-2SAE
(1) Serial interface (2) Serial interface LINK LED
(3) Captive screw (4) Serial interface ACT LED