H3C Technologies H3C SR6600-X - Manual (Page 50)

42
NOTE:
•
The above cables are all optional for the MIM-2SAE/MIM-4SAE/MIM-8SAE to be separately ordered
if needed.
• All the above cables have a DB-28 connector at one end for connection with the router, and different
types of connectors at the other end depending on the interface on the network side.
• For the appearance and connection of a MIM-2SAE/MIM-4SAE/MIM-8SAE interface cable, see
"
Connecting a serial interface cable ."
SAPs
SAPs are not carried on the flexible interface platform (FIP) but inserted in the LPU slots of the router.
SAP-48GBE (RT-SAP-48GBE-H3)
The SAP-48GBE is a 10Base-T/100Base-TX/1000Base-T auto-sensing Ethernet service module
developed by H3C. The SAP-48GBE provides 48 RJ-45 interfaces, all of which feature Layer 3 routing
and high-performance Layer 2 switching. Each interface uses a bi-color LED indicating the running status
of the interface. In addition, the SAP-48GBE uses a run LED (RUN) to show the running status of the
service module.
Front panel
Figure 32 Front panel
(1) GE port status LED (2) Captive screw
(3) System status LED (RUN) (4) Ejector lever
(5) GE port
Specifications
Table 46 Specifications
Item Specification
Processor Multi-core MIPS processor with ASIC chips
Flash 4 MB