H3C Technologies H3C SR6600-X - Manual (Page 54)

46
Item Specification
Fiber type
62.5/125 μm
multi-mode
fiber 9/125 μm
single-mode
fiber 9/125 μm
single-mode
fiber 9/125 μm
single-mode
fiber 9/125 μm
single-mode
fiber
Max. transmission
distance 0.55 km
(0.3418 miles) 10 km (6.21
miles) 40 km (24.86
miles) 40 km (24.86
miles) 70 km (43.50
miles)
Interface speed
• 1000 Mbps (recommended)
• Full duplex
The SAP-24GBP supports the following types of transceiver modules:
• 100 Mbps SFP transceiver modules
• 1000 Mbps SFP transceiver modules
• 100/1000 Mbps SFP transceiver modules
• 10/100/1000 Mbps SFP copper transceiver modules supporting fiber-to-copper conversion (The
SAP-24GBP supports 10/100/1000 Mbps auto-sensing if used together with a transceiver
module.)
The SAP-24GBP is optional to be separately ordered if needed.
Use transceiver modules provided by H3C only. The device might be incompatible with other transceiver
modules.
Interface cables
• When working with SFP transceiver modules, the SAP-24GBP must use an optical fiber with LC-type
connectors.
• When working with transceiver modules supporting fiber-to-copper conversion, the SAP-24GBP
uses category-5 straight-through or crossover Ethernet cables when operating at 10/100 Mbps,
and uses category-6 cable (recommended) when operating at 1000 Mbps.
For the appearance and connection of a SAP-24GBP interface cable, see " Connecting an Ethernet
interface cable " or " Connecting an optical interface cable ."
SAP-48GBP (RT-SAP-48GBP-H3)
The SAP-48GBP is a 48-port 100/1000 Mbps auto-sensing optical Ethernet service module. It provides
48 SFP ports, all of which feature Layer 3 routing and high-performance Layer 2 switching. Each port
uses a bi-color LED indicating the running status of the port. In addition, the SAP-48GBP uses a run LED
(RUN) to show the running status of the module.