H3C Technologies H3C SR6600-X - Manual (Page 18)

10
Interface specifications
Table 10 Interface specifications
Item Specification
Connector type SFP/LC
Number of interfaces
• HIM-CL1P: 1
• HIM-CL2P: 2
Interface standards SONET OC-3/SDH STM-1
Interface speed 155.52 Mbps
Optical
transmit
power
Type Short distance Medium distance Long distance
Ultra-long
distance
Min. –19.0 dBm –15.0 dBm –5.0 dBm –5.0 dBm
Max. –14.0 dBm –8.0 dBm 0 dBm 0 dBm
Receiving sensitivity –30.0 dBm –28.0 dBm –34.0 dBm –34.0 dBm
Overload optical power –14.0 dBm –7.0 dBm –9.0 dBm –10.0 dBm
Central wavelength 1310 nm 1310 nm 1310 nm 1550 nm
Max. transmission
distance
2 km (1.24 miles) 15 km (9.32 miles)
40 km (24.86
miles) 80 km (49.71
miles)
Fiber type
62.5/125 μm
multi-mode 9/125 μm
single-mode 9/125 μm
single-mode 9/125 μm
single-mode
Interface cables
The HIM-CL1P/HIM-CL2P must work with an SFP transceiver module and an optical fiber that have
LC-type connectors. For the appearance and connection of a HIM-CL1P/HIM-CL2P interface cable, see
" Connecting an optical interface cable ."
HIM-CLS1P (RT-HIM-CLS1P-H3)/HIM-CLS2P
(RT-HIM-CLS2P-H3)
The HIM-CLS1P and HIM-CLS2P are high-speed OC-3/STM-1 (155 Mbps) CPOS E3/T3 interface
modules. They can also operate in packet over SONET/SDH (POS) mode. The HIM-CLS1P provides one
SFP port and the port is provided with two LEDs, which indicate the port running status and fault detection
status, respectively. The HIM-CLS2P provides two SFP ports.
The HIM-CLS1P/HIM-CLS2P has the following features:
• Connects to the processor through a 10-Gbps high-speed bus. Each OC-3/STM-1 POS interface
can be channelized into three E3s or T3s.
• Each E3/T3 channel supports the subrate processing capability, providing users with a variety of
bandwidth options.
• Receives multiplexed E3/T3 circuits on a pair of fibers through a channelized interface, saving
many link resources, the occupied area, and the cost of local networks and devices for
telecommunication service providers and large enterprises.
• Supports IP and MPLS traffic and MP with up to three E3s or T3s in each MP bundle.