H3C Technologies H3C SR6600-X - Manual (Page 27)

19
Item Specification
Receiving sensitivity –30.0 dBm –28.0 dBm –34.0 dBm –34.0 dBm
Overload optical power –14.0 dBm 7.0 dBm –9.0 dBm –10.0 dBm
Central wavelength 1310 nm 1310 nm 1310 nm 1550 nm
Max. transmission
distance
2 km (1.24 miles) 15 km (9.32 miles)
40 km (24.86
miles) 80 km (49.71
miles)
Fiber type
62.5/125 μm
multi-mode 9/125 μm
single-mode 9/125 μm
single-mode 9/125 μm
single-mode
Interface cables
The HIM-AL1P/HIM-AL2P must work with an SFP transceiver module and an optical fiber with LC-type
connectors. For the appearance and connection of a HIM-AL1P/HIM-AL2P interface cable, see
" Connecting an optical interface cable ."
HIM-RS2P (RT-HIM-RS2P-H3)
The HIM-RS2P is a 2.5 Gbps OC-48/STM-16 Resilient Packet Ring (RPR) interface module. It provides two
SFP RPR ports and two SFP Mate ports. Each RPR port is provided with six status LEDs, which show the
running status and fault detection status of RPR and optical interface at the physical layer.
The HIM-RS2P supports:
• Two frame formats: SDH STM-16 and SONET OC-48C.
• Line clock mode and internal clock mode.
• Loopback tests such as data loopback test, external SONET/SDH loopback test, and external link
loopback test.
• Hot swapping.
Front panel
Figure 16 Front panel
(1) Captive screw (2) Ejector lever
(3) PASSTHRU LED of the MAC RPR node (4) WRAP LED of MAC RPR node
(5) MAC MATE interface LED (6) STEER LED of the MAC RPR node
(7) External SFP port of the MAC RPR node