Grass Valley 8900NET v.3.2.2 - Manual (Page 31)

8900NET Instruction Manual 31
Using the 8900NET GUI
Locate Frame
Select the Flash radio button in the Locate Frame function to flash the front
LEDs on the 8900NET module to help locate the 8900 frame.
Save/Load Frame Configuration File
You may save a frame configuration to a file by clicking on the Save To
button. A frame configuration is saved to a default file (FrameConfig-
Data.mcm) and the name cannot currently be changed. Follow the file
download instructions for saving the file. This file can be recalled on this or
any other networked 8900 frame to create a duplicate configuration.
Use the Browse button to locate a saved frame configuration file or enter a
path and file name into the display. Select the Load button to load the
selected configuration to the frame.
Frame Identification
Enter any name, an index number (for SNMP reporting), and a location
name to identify a frame. You may also use the factory default frame name
or location by selecting either
Default button.
Frame SNMP Trap Reports
The Frame Configuration web page allows you to enable the following
SNMP slot reports shown in
Figure 15 on page 30 :
• Frame Bus Status (Alarm)
• Fan Status (Alarm)