Grass Valley 8900NET v.3.2.2 User Manual
Page 37
8900NET Instruction Manual
37
Using the 8900NET GUI
The status column to the left of the activation operation pull-down window
provides one of the following status reports:
•
<BLANK> –
No entry has been applied.
•
ACTIVE
– All new status reports will be sent to this destination.
•
NOT IN SERVICE
– The destination has a valid definition but the user has
not activated it.
•
ACTIVE PENDING REBOOT –
This entry indicates the report destination will
become active upon the next module reboot.
•
NOT IN SERVICE PENDING REBOOT
– This entry indicates the report destina-
tion will become inactive upon the next module reboot.
•
NOT READY
– The destination entry is invalid. The IP Address may not be
properly defined or there is no IP Address or Community entry.
Assign Asset Tag
The 8900NET module can be assigned as asset tag identifier by entering
numbers or text in the Asset Tag field. This information will appear on the
Status web page and in the module inventory when using the NetConfig
Network Configuration application.