Grass Valley 8900NET v.3.2.2 - Manual (Page 55)

8900NET Instruction Manual 55
Using the 8900NET GUI
a. Open a web browser on a PC that is connected over the network to
the Gecko 8900 frame.
b. Enter the URL of the frame where the module to be updated
resides. The frame’s main status page will appear.
c. Click on the module’s link and then click on Software Update (the
8900NET module link is shown at left).
The module’s Software Update web page will appear as shown in
Figure 35 . This form is the same for all 8900 modules that support a
network software update.
Figure 35. 8900NET Module Software Update Page
If the module does not support a network software update, the
page will appear as shown in
Figure 36 . Refer to the Release Notes
for the module for software update instructions.
Figure 36. 8900 Network Software Update Not Supported
Use
this
link