Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 177)

Setting Timecode
Profile Family 177
Setting Timecode
You can set timecode crosspoints, select drop-frame timecode, or select
timecode panel display and generators.
Selecting How to Display Timecode on a Panel
The Timecode Setup dialog box enables you to set the timecode display and the
timecode source on a channel to the values required for your application.
1. Click in a panel to select it.
2. Choose Options | Select Timecode to open the Timecode Setup dialog box.
The Timecode Setup dialog box is divided into two groups: Display on Panel
and Timecode Generator Settings .
Figure 85. Timecode Setup dialog box
3. Select the timecode to be displayed on the panel from the Display on Panel
group:
- LTC Input is a separate signal input via the genlock card.
- VITC Input is the timecode from the VITC input signal.