Bang & Olufsen BeoVision Avant - User Guide User Manual
Page 12
12
>> Set up your television
Locate the connection panel and other
important items:
1 Holes for mounting of a wall bracket.
2 Holes for mounting of a stand.
3 Covers for the main connection panel.
Slide the covers to the sides to reveal the
connection panel.
4 Easy access panel.
5 Standby indicator and room lights
indicator.
Overview
Depending on your setup, different stand or
wall bracket covers may be used. See the
guide for your stand or wall bracket for
information on how to mount such covers.
Gather the cables from the upper and lower
part of the panel, fasten them with cable
ties and run them upwards or downwards
behind the cable holders depending on wall
bracket or stand placement. See the
illustrated example.
Run cables
If you have a motorised stand or wall bracket,
make sure that there is enough slack in the
cables to allow the TV to turn to either side
or tilt before you fasten the cables with cable
ties to make a neat bundle.
4
3
3
5
2
2