Bang & Olufsen BeoVision Avant - User Guide - Manual (Page 42)

42
Change channel input by enabling or
disabling the cable, terrestrial, satellite and
analogue inputs, the active antenna and the
line length compensation.
You can reinstall all your TV channels by
letting the television tune in all the channels
automatically.
If you switch to a different network, the
channels in your lists may change as well.
Only possible if several networks are
available when tuning terrestrial channels.
To change a channel input, bring up the
INPUTS menu.
To reinstall all channels, bring up the
REINSTALL CHANNELS menu.
To select a network, bring up the
PREFERRED NETWORK menu.
NOTE! If you reinstall all your TV channels, all
the channel settings you have made
disappear!
For information about the access code, see
page 69 .
If you disable an input, all channels and
configuration regarding this input are
deleted.
The PREFERRED NETWORK menu may also
appear when tuning in terrestrial channels.
Change channel input settings
>> Re-tune channels
MENU
SETUP
CHANNELS
TUNING
INPUTS
REINSTALL CHANNELS
EDIT TV GROUPS
PREFERRED NETWORK