Bang & Olufsen BeoVision Avant - User Guide - Manual (Page 37)

37
>> Record a programme
Check the Timers already set
You can check the Timers that are waiting
to be executed, as well as edit or delete
them. You can also disable a Timer either
once or indefinitely if a repeating Timer
overlaps with another Timer.
If you edit a disabled Timer, it is automatically
enabled again.
When creating Timer recordings and the
maximum capacity of Timer recordings
approaches, you are notified in the menus.
The timeshift buffer is a temporary storage. If
you change source, channel or station, or if
you switch off the TV, the buffer content is
deleted. To keep a recording, you can copy it
from the timeshift buffer to the HARD DISK
CONTENT menu by making a manual
recording. If you start a manual recording
during timeshift, the recording starts from the
start time of the programme. If you switch
channel after a programme has started, the
recording will start from there. For more
information,
see pages 33–34 .
Copy to the hard disk…
Press to pause timeshift
Press to start playback
Press to cue backwards to the
programme you want to record
Press to start recording to the
hard disk
.* 1
1 *If you start a manual recording during
timeshift, the part of the programme already
stored in the timeshift buffer will also be
included in the recording.
After copying from timeshift to the HARD
DISK CONTENT menu, you can edit the new
recording, as you can edit any other
recordings.
NOTE! The programme provider may have
some restrictions on what can be recorded or
timeshifted. The recorded programme may
also be available for a limited time period.
Contact your programme provider for
information about recording policy.
Copy from the timeshift buffer
MENU
MENU
RECORDINGS
TIMER INDEX
…
Time shift buffer
Hard disk content