Bang & Olufsen BeoVision Avant - User Guide - Manual (Page 21)

21
>> Connections
Connect speakers to the television
You can connect up to ten wired speakers
and subwoofers to the television using
Power Link cables.
In addition, you can connect up to eight
speakers wirelessly, including subwoofers.
For more information about setting up
wireless speakers,
see page 43 .
Disconnect all systems from the mains
before you connect additional equipment.
Depending on the type of speakers you
connect to the television, different cables
and maybe also adaptors are needed. Cables
and adaptors are available from your Bang &
Olufsen retailer.
Connect speakers
> Connect a Power Link cable to the
appropriate socket on the speakers you
wish to connect to the television.*
1
> Run the cables to available sockets
marked PL 1–5 on the television.
> Connect a Power Link cable to the
appropriate sockets on a subwoofer.
> Run the cable to an available socket
marked PL 1–5 on the television.
> Reconnect the television and the
connected speakers to the mains.
1 *Remember to set the switch for left and
right position on the speakers depending on
whether your speaker is positioned to the left
or right of your listening position.
If you want to connect two speakers to one
PL socket on the television and it is not
possible to loop the cable between the
speakers, an extra splitter is needed, contact
your Bang & Olufsen retailer for more
information.
PL 5 PL 4
MONITOR
CONTROL
PUC 2
A+B
PUC 1
A+B EXT. IR
PL 3 PL 2 PL1 PUC 3 A+B
CTRL 3 CTRL 2 CTRL 1
1 2 3 4 5
S/P-DIF
IN STAND
AV
IN
Example of a speaker setup.
Rear speaker Rear speaker
Subwoofer
Front speaker Front speaker